Extra Wireless Keypad Instruction ( option)
Model: WKP-03
This keypad does not work alone. You need to program it with PiSector Alarm Systems. It supports System model GS07, GS08, PS03 series
systems.
Anti-Remove Spring
Package includes
PiSector Keypad x 1
Power adapter 12V 1A, input 100-240V output 9- 12V, Current 1A
RFID Door Access Keychain Tag X 2
Add the keypad to console
Step 1 Connect power to the keypad, and you will see Arm indicator light flash once every second. This is Stand by(Disarm) status, meaning
system is at power on. To keep internal back up battery in charge, please turn on the battery switch to ON position. Put the keypad on a
hard surfaced table, and make sure to not trigger the keypad by releasing the anti-move spring, or by pressing the anti-move spring with
hand. Make sure the keypad does not get triggered during programming.
Step 2 At your main console, press Program followed by password. Then choose Remote Controllers ---press Enter --- select Add --- press
Enter again. When you see "Trigger Controller, Code: " display, go to your extra keypad, press default password
1 2 3 4 5 6
followed by Arm
key (the lock icon), and you will see 9 digits display on the console. This is unique address for the extra keypad on the console. It will be auto
saved after 3 seconds, and you will see "Add Owner Name". You can give a name to this keypad on the console, and then follow the steps to
record a voice for the keypad name as your choice (optional). After that press Enter to continue until you see Add successful.
Step 3 Press Chime key to exit setting status.
Add RFID Key chains to Keypad
During system disarm status, you can press default password
1 2 3 4 5 6
followed by Enter key. You will see Set indicator light on and Enter
key flashing. Then press
2 0 1
followed by an Enter key --- Send indicator light on --- move your target key chain (the one that you want to
add) close to the keypad read area, and you will hear a few short beeps, meaning add successful. You may add maximum 8 pieces RFID keys.
At the end press Chime key to exit setting status.
Delete RFID key chains from your PiSector Keypad
During system disarm status, you can press default password
1 2 3 4 5 6
followed by Enter key. You will see Set indicator light on and Enter
key flashing. Then press
2 1 1
follow by an Enter key. It will auto delete all key chains. You CANNOT delete one key chain each time. If you
lost any key chain please choose to delete all key chains, then add other key chains again. At end, press Chime key to exit setting status.
Operating instruction
Password followed by Arm key to arm system--- Arm indicator light on in solid
Password followed by Disarm key to disarm System. Open light on for 3 seconds (depending on how long you set for door open time ---
default 3 seconds) --- Arm indicator light flashes once every second
Password followed by Home key to arm system when you are at home--- Arm indicator light flashes once every 3 seconds
Password followed by SOS for emergency
