Solenoid Valve
SVA20 Series
SOLENOID VALVE
Series
②
There is a concave niche on the back of the solenoid valve as figure 1 shows. Insert a flathead
screwdriver into it and to pull up a solenoid valve as figure 2 shows.
A
A
A
A
A
A
Flathead Screwdriver
P
R
B
A
A
B
B
A
A
B
B
A
A
B
B
A
A
B
A
A
B
A
A
B
A
A
B
A
A
B
Solenoid Valve
P
R
Figure 1
Figure 2
③
To mount a solenoid valve on a manifold base, insert the valve toward the arrowed direction with
attentions to the connection of a base connector and a fixing pin.
A
Fixing pin
Fixing screw
P
R
B
A
A
B
B
A
A
B
B
A
A
B
A
B
B
A
Manifold side
Base connector
④
Tighten a fixing screw with the tightening torque 0.35-0.4Nm.
7. Detachable Individual Plug-in Connector
●
Detachable Individual Plug-in Connector
■
The individual Plug-in Connector is attached by inserting the connector into the socket.(Figure 3)
■
In order to detach the connector, push the latch to the arrowed direction in the figure below and pull out
the connector.
A
A
A
A
A
A
A
A
Valve
Connector
* Insert to a socket with the latch facing down.
Connector back side
Latch
Black: A side coil
White: B side coil
Red: COM+V