No Diving or Jumping. Observe all Safety Rules
3-8
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL WALL
Section
3
f.
After all the wrinkles in the liner are removed, trim
any extra length of plastic coping so there is no
overlap.
(Image 19)
g. Roll up any excess liner hanging below the plastic
coping and tape it in place near the top of the pool
wall. Important: Do not trim off the excess liner.
(Image 20)
C. CONT. INSTALL THE POOL LINER - OVERLAP
Important Note:
Do not trim off the excess liner. (If the liner ever needs to
be removed, trimming the liner will make re-installation
very difficult.) Instead, roll up any excess liner and tape
it in place near the top of the pool wall.
19
20
