No Diving or Jumping. Observe all Safety Rules
GENERAL INSTRUCTIONS - BRACELESS OVAL POOLS
ASSEMBLING THE POOL WALL
Section
3
f.
After all the wrinkles in the liner are removed, trim
any extra length of plastic coping so there is no
overlap.
(Image 18)
g. Roll up any excess liner hanging below the plastic
coping and tape it in place near the top of the pool
wall.
Important:
Do not trim off the excess liner.
(Image 19)
h. Install stabilizers.
(Image 20)
3. Proceed to Section 4 -
Installing the Pool Frame
C. CONT. INSTALL THE POOL LINER
Important Note:
Do not trim off the excess liner. (If the liner ever needs to
be removed, trimming the liner will make re-installation
very difficult). Instead, roll up any excess liner and tape
it in place near the top of the pool wall.
18
19
3-8
20
