Pirez Electric Folding Bike
Operator Instructions
Operating the display unit
Legend:
Up
Power
Down
LCD backlight
Cruise Mode
Operating the Visual Display Unit (VDU)
1.
Press and hold the
power
button for 3 seconds to display
mode (A).
MODE (A)
Mode (A) indicates:
•
Battery Level /
TIM:
Single ride time (hh:mm)
•
PAS Class / Speed (km/h)
•
DST:
Single distance travelled (km)
2.
Press the power button again to
move to mode (B).
MODE (B)
Mode (B) indicates:
•
Battery Level /
TIM:
Total ride time (hh:mm)
•
PAS Class /
AVS:
Average Speed (km/h)
•
ODO:
Total distance travelled (km)
3.
Press the power button a third
time to move to mode (C).
4.
Press and hold the
power
button to turn off.
MODE (C)
Mode (C) indicates:
•
Battery Level /
TIM:
Total ride time (hh:mm)
•
PAS Class /
MAX:
Maximum Speed (km/h)
•
ODO:
Total distance travelled (km)
Cruise mode - AUTO
Press and hold the
Down button until the
cruise control icon appears.
The e-bike will cruise at a
fixed speed
of 6km/h.
Release the button to exit cruise mode.
Cruise mode - CONTROL
Ride the e-bike to your desired speed (must be over 7km/h).
Press and hold the
Down button for 3 seconds to enter cruise mode.
Press the brake lever or any button to exit cruise mode.
LCD Backlight
Press and hold the
Up button to turn on the backlight.
Press and hold the
Up button again to turn off.
Pedal Assist System (PAS) mode
Press the
Up or
Down button to choose the PAS speed from 0-5
Care & Maintenance
General care & maintenance
•
Read these instructions carefully before riding the e-
bike.
•
When riding you must follow the local laws and
regulations, such as wearing a helmet.
•
Always take care and ride safely.
•
Ensure you check the brake system, tyre pressure and
battery charge prior to riding each time.
•
Always use your front brakes first for stopping.
•
Do not ride through water of a depth greater than
15cm.
•
Commence your ride with the PAS speed set to 3.
•
Keep the lamp switched on at night.
•
Check and replace wearable parts such as tyres and
brake pads at regular intervals.
•
Check all screws, cables, chains and other parts
regularly.
•
Minors, pregnant or intoxicated persons must not ride
an e-bike.
•
Store the e-bike in an environment free from moisture,
corrosion or high temperatures.
•
Store the e-bike away from severe sun and rain.
Battery and Charging Information
•
A red indicator light on the charger means the battery is charging. Once
the indicator light turns green the battery is fully charged.
•
Do not expose batteries to temperatures < -20°C or >35°C
•
Fully charge the battery and store safely if not to be used for over 30 days.
•
Fully charge the battery at least every 60 days or the battery may self
discharge and cause damage. This damage would void the warranty.
•
Never expose the battery to a damp environment or submerge in water.
•
Never short circuit the battery terminals.
•
Charge with the original charger only.
•
Do not disassemble or cause impact to the battery pack.
•
Do not place in a fire or drop from a high position.
•
Avoid contact with the terminals
•
Do not charge the battery while it is powered on.
•
Insert the charger cable into the battery before pluging into a power
outlet.
•
Do not cover the charger with anything while charging.
•
Once charging is completed, remove the charger cable from the battery
before removing the plug from the power outlet.
•
Keep battery out of reach of children.
•
The capacity of Li-Ion batteries will decrease if stored below -10°C.
•
Recycle or dispose of batteries in accordance with local regulations.
