Piranha 900157, Руководство пользователя

Страница: 4 / 7

HOW TO ASSEMBLE AND USE
The Power Vac comes with a 18V rechargeable battery that must be
charged initially for 24 hours prior to operating for the first time and 12
hours thereafter.
1) The Storage Unit is also the Recharge Stand and has a Charging Hole
for the Charging Jack to lock into place.
2) Place the
Charging Jack in
beneath the
Storage Stand
into the Charging
Hole.
3) Twist the
Charging Jack to
the left to lock into
the Charging
Hole.
4) To Place the Power Vac onto the Recharge / Storage Unit, sliding the
Main Body onto Main Body Hook, as indicated on the above picture.
5) While sliding the Power Vac onto the main body hook, the main body
must also clip onto the Charging Jack. The Power Vac has been fitted
on the Storage Unit correctly when the Charging Light Indicator is on.
NOTE: The Indicator light must be on to charge the battery
6) The unit must be charged for 24hours before the first use only. For
charging after first use, charge for 12hours. Once the battery is fully
charged the unit can continuously be in operation for approximately 12
minutes before requiring to be recharged.
NOTE: Peak performance may only be realized after the battery has
been charged and fully drained two of three times. To maintain peak
performance, it is recommended that the battery be fully drained and
recharged for the complete 12hour time required.
7) Push the “ON” switch to operate the unit. Release the switch to
automatically switch “OFF”.
Main Body Hook