10. To utilise the hose and accessories, the vacuum must be locked into the upright
position and the height adjustment on the Long Pile setting.
11. Remove the hose from the housing and add the extension tube, crevice tool, small
brush or mini turbo brush. To remove twist and gently pull apart.
12. To change back to cleaning with base motor, make sure the hose has
been refitted tightly into the housing. This will ensure the air flow
suction is at its strongest. The hose housing is conveniently made of a
transparent plastic allowing you to easily identify blockages to clear.
MAINTENANCE
NOTE: Ensure the unit has been switched off and unplugged from power socket, before performing any
maintenance.
1.
The dust container must be cleaned as often as possible. Do not allow it to get too full
or pass the “FULL” marking. Hold the dust container handle and press the release
button to unlock the dust container. Pull gently out of the housing.
2.
To open, hold and twist the top part of the canister
anticlockwise. Empty the dust container into a waste bin.
HEPA Filters
These filters are designed to keep the smallest dust particles in the dust container and also
keep the air cleaner. Due to their design, they can become clogged and block the air flow
through the motor. To avoid stress on the vacuum motor, the HEPA filter must be cleaned
frequently.
3.
To remove the HEPA filter, hold from base and gently pull to
release.
4.
Brush the filter clean and refit into the dust container. The
filter can also be washed in warm water and dried thoroughly
before using.
5.
Clean and rotate filters regularly. Filters are available through
the distributor.
6.
Lock the dust container and refit into its housing.
