STARTING THE POWER STEAMER
1. Plug the power cord into an electrical outlet. This will switch the power
indicator light ON.
2. It will take approximately 3-4 minutes for the appliance to generate the
steam.
CAUTION: Do not leave the steam cleaner unattended while
waiting for steam.
3. Press the Steam Lever to emit the steam and begin passing slowly
over the surfaces intended for cleaning. For disinfecting areas, hold the
steam cleaner no more than 1 inch away from the surface and pass
over slowly until entire area is covered.
REFILLING THE WATER TANK
1. Unplug the power cord from electrical outlet.
2. Press and hold Steam Lever until all pressure has been released.
3. Before opening Water Tank Cap it is important to wait approximately 3
minutes for the appliance to cool down. Slowly turn the cap, only a half
turn, and wait for the hissing sound (if any) to completely stop. The
hissing sound may be present due to residual pressure not released
while holding the steam lever.
4. Carefully unscrew the cap and follow process outlined in step 1 and 2.
MAINTENANCE
NOTE: Please ensure the steam cleaner has been unplugged from the
power source and cooled down before any cleaning and maintenance is
carried out.
1. Always empty any excess water from water tank after each use.
2. Always ensure the unit has cooled before putting it away in a dry, cool
place.
3. To ensure the highest level of operation over a long period of time, it is
recommended that he water tank be rinsed out with water at least once
a month to clean any water calcification accumulated.
Do not use
vinegar or other substances to remove calcium deposits.
4. To clean fill with one measure of water, replace cap and shake unit to
loosen any calcium deposits. Remove cap and empty water from tank.
WARNING: Do not immerse the steam cleaner in water.
