Piper PA-28 Cherokee 140, Руководство пользователя

Страница: 8 / 27

With the hatch cover in place poke a hole in the covering for
each screw hole and drill 1/16” holes in the Wing for the
Hatch Cover Screws.
Add a gusset of Epoxy Glue around the base of each Servo Mounting
Post for extra strength.
Tip: Also installing a small wood screw through the top of the Servo
Hatch Cover into the Servo Mounting Post will provide superior
strength (optional).
Position the Aileron Servos so the Servo Arm exits the middle
of the Hatch cut out. Pre­drill the holes in the Mounting Posts
with a 1/16 inch Drill Bit. Attach Servos to the Hatch Cover
Mounting Posts using the hardware supplied with your Servos.
Do the same for the Flap Servos.
Attach an 18 inch Servo Extension to each Aileron Servo. Using a light string, tie a nut or small weigh to one end
and drop it through the Wing Rib opening until it appears in the Aileron Hatch opening. Tape or tie the string to
the Servo Lead and carefully pull it through the wing. You may be able to get the Flap Servo lead through the
Wing without tying a weight.
TIP: Heat shrink a 1­1/4 inch piece of 5/8 inch wide shrink tubing over each Servo Extension connection to
prevent them coming apart
.
Page 6