Piper NCO-2H, Инструкция по установке и эксплуатации

Страница: 8 / 12

SYMPTOMS POSSIBLE CAUSE REMEDIES
No heat
Power switch Check power switch is on and operations.
Power supply Check oven fuse or breaker.
Loose wires Check wires at terminal block.
Oven thermostat
Indicator light should come on when the
thermostat is turned up.
Insufficient deck heat
Low voltage
Check power supply voltage matches name
plate voltage.
Loose or burnt wires Check wiring.
Doors Check that doors fit and seal properly.
Thermostat
Indicator light should come on when
thermostat is turned up.
Excessive deck heat
Faulty element Check for internal element ground.
Thermostat
Indicator light should go off when thermostat
is turned off.
TROUBLESHOOTING GUIDE
If problems are not found by the following checks, then you should contact your Authorized
Parts and Service Dealer for service. They have the necessary parts and training to repair
your unit quickly and efficiently.
DANGER: Disconnect all power to unit before servicing.
Call Piper Products directly at 800-544-3057 if you need further assistance.
6