Manual for StealthTouch-M5 with Dual Core & Core 2 Duo Model v1.2
Page 15
Section B: Using StealthTouch-
M5 system
Chapter 3: Touch screen panel
[Note]
The instructions below apply for Resistive Type Touch Panel only. For other types of Touch Panels (Infrared,
Capacitive, SAW), please contact PioneerPOS Technical Support.
StealthTouth-
M5’s Touch Screen can be operated with finger or soft stylus. If you have re-installed the driver software,
you need to open TouchKit to re-calibrate the touch screen:
1.
Go to Start -> All Programs -> eGalaxTouch -> Configure Utility.
2.
Click on “Tools” when you need to calibrate.
3.
Perform 4 point calibration when you see the calibration screen. Use a touch screen stylus pen or your finger to
touch each point for about 1-
2 seconds until you hear a “beep” sound.
[Note]
Linearization is not needed for regular use.
Picture: 4 point calibration screen
