16
En
Note
• Pairing mode of the system is cancelled
at below condition.
- Can’t connect with
Bluetooth
device for
3 minutes.
- Push the
Bluetooth
paring
button
again during pairing mode.
1
Press and hold
Bluetooth
paring button for 1 second.
After that the
POWER
indicator blinks white
quickly and the unit will enter the pairing
mode.
Note
• When the system is turned on first time,
the unit goes to pairing mode
automatically.
2
Switch on the
Bluetooth
device
that you want to perform pairing
with, place the device within 1 m of
the system, and set it to the pairing
mode.
Pairing with the unit will begin.
• For more details, see also the operating
instructions of your
Bluetooth
device.
• If a list of supported device is shown on
the display of the
Bluetooth
device, you
will need to select “XW-LF1/LF3”.
• In case of entering PIN code, use “0000”.
(Only “0000” works for PIN code in this
product.)
3
When
Bluetooth
device has
connected, the POWER indicator
will change from blinking to
lighting.
4
Start playback of music
contents stored in
Bluetooth
device.
Connecting to a
Bluetooth
device with which pairing
has been completed
1
Confirm that the POWER
indicator on the unit is blinking
slowly.
If the indicator is not blinking, but remains
lit, it means the unit is already connected to
a different
Bluetooth
device.
Operate the connected
Bluetooth
device to
disconnect it from the unit.
2
On the
Bluetooth
device that is
already paired with the unit, select
the unit from the
Bluetooth
list and
connect.
The name of the unit is shown as “XW-LF1/
LF3”.
3
Connection with devices is
successful, the POWER indicator will
change from blinking to lighting.
Operating range of
Bluetooth
audio is up to
10 m. (Measured in open space. Walls and
structures may affect range of device.)
LFA_En.fm 16 ページ 2014年6月26日 木曜日 午後1時26分