Listening to your system
05
44
En
Chapter 5
Listening to your system
About the listening modes
As explained in
Placing the speakers
on
page 14 and
Using the wireless speaker system
on page 42, there are several setup options
available. However, unless you have connected
an extra pair of surround speakers, you should
use the Standard (
Listening in surround sound
on page 45) and Advanced (
Using the
Advanced Surround effects
on page 46)
surround listening modes with your setup.
If you have connected an extra pair of surround
speakers,
the Front Surround modes are
available with a 3-spot setup. See
Using Front
Surround
on page 46 for more on this.
Make sure you have completed
Using the
Room Setup
on page 32. For a more detailed
surround sound setup, see
Using the System
Setup menu
on page 65.
• Certain features explained in this section
may not be possible depending on the
source (for example, 88.2 / 96 kHz sources),
or a conflicting system setting. See
Error
Messages
on page 87 for more on this.
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
from the source material.
•
Press SURROUND to select the ‘Auto’
listening mode.
If the source is Dolby Digital or DTS, the
2
DIGITAL
or
DTS
indicator on the front panel
lights.
• Any previously active Dolby Pro Logic or
Advanced Surround mode is canceled
when Auto listening mode is selected.
SURROUND
XV-DV9.book 44 ページ ２００４年２月２０日 金曜日 午前１１時４２分
