Editing
08
77
En
1
Press HDD or DVD to select the hard disk drive or
the DVD.
2
Press DISC NAVIGATOR to display the Disc
Navigator screen.
Playback will automatically stop when you do this.
• You can also access the Disc Navigator from the
Home Menu (press
HOME MENU
, select
Disc
Navigator
then press
ENTER
).
• Use the
/
(cursor up/down) buttons to highlight
the command you want from the menu options on
the left (see
Disc Navigator menu options
below),
then press
ENTER
. Most commands require you then
to select a title (or chapter) or location from the
thumbnail views area of the screen. Use the
//
/
(cursor buttons) followed by
ENTER
to do this.
• When in the thumbnails area of the screen, use the
PREV
(
) and
NEXT
(
) buttons to display the
previous/next page if there are more than six titles/
nine chapters.
• As you highlight different thumbnails, information
about the title is shown in the central area of the
screen. Press
DISPLAY
to change the information
displayed.
• If you are editing a VR mode disc, press
PLAYLIST
to
switch between Original and Play List Disc Navigator
screens.
• Press
RETURN
to get back to the menu options on
the left from the thumbnail area of the Disc
Navigator.
• You can switch between the HDD and the DVD Disc
Navigator screens using the
HDD
and
DVD
buttons
(front panel or remote).
You can copy a selected HDD title to DVD, or DVD title to
HDD by pressing
ONE TOUCH COPY
(see also page 61
for more on One Touch Copy).
When editing HDD content, a row of group names
appears above the title thumbnails (see
Editing HDD
groups
on page 82 for more details). You can access
these by pressing
(cursor up) repeatedly until the
All
group is highlighted, then using the
/
(cursor left/
right) buttons to select a group. Press
ENTER
to ‘open’
the highlighted group.
Titles on the HDD marked with a
icon are timer
recordings set to Auto Replace Recording (see
Standard
timer recording
on page 50).
Titles on the HDD marked with a
icon are recently
recorded titles that haven’t yet been played.
3
To exit the Disc Navigator, press HOME MENU
.
Remember
• You can change the thumbnail pictures used for titles
using the
NAVI MARK
button—see
Changing the
thumbnail picture for a title
on page 36.
Disc Navigator menu options
The commands available from the Disc Navigator for the
VR mode and Video mode discs and the HDD are shown
below.
•
Play
– Play a title (page 78)
•
Erase
– Erase a title (page 78)
•
Title Name
(
Ttl Name
) – Name or rename a title
(page 79)
•
Lock/Unlock
– Lock or unlock a title to prevent
accidental changes being made (page 81)
•
Erase All
– Erase all titles (page 81)
•
Undo
– Undo the last change (page 81)
(Original)
•
Play
– Play a title (page 78)
•
Erase
– Erase a title (page 78)
•
Title Name
(
Ttl Name
) – Name or rename a title
(page 79)
•
Chapter Edit
(
Chpt Edit
) – Make detailed changes to
chapters in a title (page 79)
Original
1/1
Undo
DVD
1
2
3
4
5
6
Disc Navigator
Play
Erase
Ttl Name
Chpt Edit
Erase Sec
DVD Remain
0h37m(FINE)
Play List
1/1
Undo
DVD
1
2
3
4
5
6
Disc Navigator
Play
Erase
Ttl Name
Chpt Edit
Erase Sec
DVD Remain
0h37m(FINE)
Playlist / Original indicator
Video mode
VR mode
PT-RW_UK.book 77 ページ 2004年7月26日 月曜日 午後3時41分