Pioneer XV-DV333, Руководство по обслуживанию

Страница: 73 / 108

XV-DV333
73
5 6 7 8
5 6
7
8
C
D
F
A
B
E
- U M 9
ERR. 0
FL
‡ ‡ ‡ ‡
ERR. 1
ERR. 2
ERR. 3
ERR. 4
NO ERR
(Source is 88.2/96kHz.)
(Source is not 88.2/96kHz.)
D I E R - U M
D S E R - U M
H R E Q - U M
N - G D S U M
M D U T - M
O K D S 9 -
O K D S - NO ERR
[Error] [8-char FL display]
1 2 3 4 5 6 7 8
6. DSP error message mode
[ How to enter DSP error message mode]
• Press "DISPLAY" button of the accessory remote control(*) in service test mode, to select the mode that DSP error message are displayed.
[ How to quit DSP error message mode]
• Press "DISPLAY" button of the accessory remote control(*) again to select normal service test mode.
For this reason, the usual function of "display" is not effective during Service Test mode.
• DVD total running time/remaining time display is inactive.
• OSD changing on TV is also inactive.
Space
DIR UNLOCK (This character is displayed while DIR is UNLOCK.)
DSP MUTE (This character is displayed while DSPMUTE is active.)
96k (This character is displayed while the source is 88.2 or 96kHz PCM.)
The name of the error is
displayed in Four characters.
Refer to "7.1.10 DSP TROUBLE SHOOTING".
Specification of DSP error display
Example of DSP error display
SIDE B
SIDE B
CONTROL ASSY
F
Service Test mode connecting point
TEST
Connecting point
* 1 : The "U", "M" and "9" are not displayed synchronizing with the display "ERR_0" - "ERR_4" ("DIRERR",etc),
but it depends on the state each time.
The following example display of "ERR_0" - "ERR_4" is just a sample.
*
1
(*) : The alternative control is "DISPLAY" button of the accessory remote control of
Pioneer Home Theater System or "SYSTEM DISPLAY" button of Pioneer
mini Component System.