Pioneer XDJ-RX, Руководство по эксплуатации

Страница: 29 / 34

En
29
Changing
the
settings
Changing the settings
1 Press the [MENU (UTILITY)] button for over 1 second.
The [ UTILITY ] screen is displayed.
2 Use the rotary selector to change the setting.
3 Press the rotary selector.
The changed settings are stored.
! To close the [ UTILITY ] screen, press the [ MENU (UTILITY) ] button.
About the auto-play mode
!
When the auto-play mode is turned on, the auto-play mode icon in
the upper left corner of the normal playback screen lights up and
[
A. CUE ] turns off. The songs in the category/folder having the cur-
rently loaded song are continuously played until the end of the last
song.
! The songs are played in the sequence of time at which the songs are
loaded.
About the auto standby function
When the auto standby function is turned on, the power is automatically
set to the standby mode after four hours have passed with all of the fol-
lowing conditions met.
— That none of this unit’s buttons or controls are operated.
—
That this unit’s channel level indicator is not lit.
— That the playback function is not operating.
—
That no PRO DJ LINK connections are made.
— That no USB device is connected to the USB device insertion slot
(Type A terminal) on the unit’s top panel.
—
That no computer is connected to the [ USB ] terminal (Type B
terminal) on the unit’s rear panel.
! When the [ MASTER REC (WAKE UP) ] button is pressed, the standby
mode is canceled.
! This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [
AUTO STANDBY
]
to [ OFF ].
About language settings
Select the language to be used for displaying track names and mes-
sages on the screen.
!
When the language is changed, the messages on the main unit
display are displayed in the selected language.
! When displaying track names, etc., to display characters written in
local codes other than Unicode, change the [ LANGUAGE ] setting.
Setting preferences
Options settings Setting ranges Descriptions
A. CUE LEVEL
–36 dB / –42 dB / –48 dB / –54 dB /
–60 dB / –66 dB / –72 dB / –78 dB / MEMORY *
Sets the auto cue level.
=
Changing the auto cue level (p. 19 )
SLIP FLASHING ON */ OFF
Sets whether or not the indicators of buttons, etc., for which the slip function is
activated when the [
SLIP ] button is pressed flash.
ON AIR DISPLAY ON */ OFF Set whether to display/hide the [ ON AIR DISPLAY ].
VINYL SPEED ADJUST
TOUCH/RELEASE
TOUCH&RELEASE */ TOUCH / RELEASE = Adjusting the playback and stopping speeds (p. 12 )
AUTO PLAY MODE ON / OFF *
=
About the auto-play mode (p. 29 )
LOOP SLICE CONTINUE */ SINGLE = Using Loop Slice (p. 15 )
EQ CURVE
EQ
*/
ISOLATOR
Sets the
EQ/ISO
(
HI
,
MID
,
LOW
) control function to [
EQ
] or [
ISOLATOR
].
CH FADER CURVE
[ ] CH FADER CURVE1 /[ ] CH FADER CURVE2 */
[ ] CH FADER CURVE3
Sets the channel fader curve.
=
Mixer section (p. 23 )
MASTER ATT –6 dB , –3 dB , 0 dB * Sets the master output attenuator.
MIXER MODE XDJ-RX
*/
MIDI CONTROL
= Changing the [
MIXER MODE
] (p. 31 )
LANGUAGE — Sets the main unit display’s language.
LCD BRIGHTNESS 1, 2, 3*, 4, 5 Sets the main unit display’s brightness.
SCREEN SAVER ON */ OFF
When set to [ ON ], the screen saver starts up in any of following cases:
! When no track is loaded in this unit for over 5 minutes
! When no operation is performed for over 100 minutes while in the pause or cue
standby mode or when [ END ] is displayed on the deck display section.
AUTO STANDBY ON
*/
OFF
=
About the auto standby function (p. 29 )
VERSION No. — Displays this unit’s software version.
*: Setting upon purchase