Getting started
04
13
En
English
Français
Español
Chapter 4:
Getting started
CAUTION
• Use of controls or adjustments or performance of
procedures other than herein expressly specified may
result in hazardous radiation exposure or other unsafe
operation.
Always follow the instructions in this chapter in sequence.
Turning on
1
Press
Í
STANDBY/ON
This product switches to the last selected source.
APS mode
• After this product is kept inactive for 15 minutes, it
automatically switches to the standby mode.
Setting the clock
Note
• During setting, if no action is made within 90 seconds, the
system exits clock setting without saving earlier
operations.
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
1
In the standby mode, press and hold
CLOCK to activate clock setting.
[
24H
] blinks.
2
Press
:
/
9
to select [24H] or [12H] and
then press CLOCK to confirm.
The hour digits will blink.
3
Press
:
/
9
to set the hour, and then
press CLOCK to confirm.
The minute digits blink.
4
Press
:
/
9
to set the minute, and then
press CLOCK to confirm.
Selecting a source
Press
INPUT
repeatedly to select a source.
• [
DISC
]: the disc in the disc tray
• [
BT
]:
Bluetooth
capable device that is paired
• [
USB
]: .mp3 files stored on the connected USB storage
device
• [
TUNER
]: the FM radio
• [
AUDIO IN
]: the audio input through the
AUDIO IN
socket
X-EM22_SYXE8_En(NorthAmerica).book 13 ページ ２０１６年７月１３日 水曜日 午後３時３４分
