Bluetooth
®
Audio playback
27
En
English
Français
Español
09
Note
• This unit will be displayed as “Pioneer X-CM56” on all
Bluetooth
capable devices that you have.
Pairing will start.
• Place the
Bluetooth
capable device close to the unit.
• Please refer to the user’s manual for your
Bluetooth
capable device for details on when pairing can be
performed and the procedures required for pairing.
• When PIN code entry is requested, enter “
0000
.” (This
unit does not accept any PIN code setting other than
“
0000
.”)
4 Confirm on the
Bluetooth
capable device
that pairing has been completed.
If pairing with the
Bluetooth
capable device has been
completed correctly, the name of the
Bluetooth
capable
device will be displayed on the front panel of the unit. (Only
single-byte alphanumeric characters can be displayed. Any
character that cannot be displayed will be indicated by a
“
∫
”.)
Listen to music on the unit from a
Bluetooth
capable device
1 Press the .
The unit will switch to
Bluetooth
input.
2 A
Bluetooth
connection will be created
between the
Bluetooth
capable device and the
unit.
Procedures for connecting to the unit should be performed
from the
Bluetooth
capable device.
• Please refer to the user’s manual for your
Bluetooth
capable device for details of the connection procedures.
3 Playback music from the
Bluetooth
capable
device.
Note
• When
Bluetooth
capable devise is not connected and
no operations have been performed for more than 20
minutes, the unit will automatically power off. In this
case it is required that the Auto power off is switched to
ON
.
• Auto power off can be switched to
ON
/
OFF
(page 34).
BT STANDBY
• The following can be done when the unit is on standby
with the
BT STANDBY
switched
ON
.
• By selecting a
Bluetooth
capable device that already
has a connection history (pairing has already been
conducted) with this unit, this unit will automatically turn
on with the
Bluetooth
function.
BT STANDBY settings
1 Press the .
2 Press MENU and then press / until
“BT STANDBY” appears on the display.
3 Press ENTER and then press / to switch
BT STANDBY ON/OFF.
• It is set to
OFF
in the factory setting.
Note
• When the
BT STANDBY
is
ON
, “BT STANDBY ON” is
displayed on the main display.
• When the
BT STANDBY
is
OFF
, “BT STANDBY OFF”
is displayed on the main display.
Connection while in BT STANDBY mode with
Bluetooth
capable device
When connection history (pairing has already been
conducted) with a
Bluetooth
capable device exists for the
unit during
BT STANDBY
, the unit can receive a connection
request directly from the connection history.
The unit will start using the
Bluetooth
function, and connect
with a
Bluetooth
capable device.
Even devices that have already been paired with this unit will
not connect during
BT STANDBY
in the following cases.
In such cases, delete pairing history from the
Bluetooth
wireless technology device and perform pairing again.
• Up to 8 pairing history can be recorded with this unit. If
connecting to a
Bluetooth
wireless technology device
over 8 units, the oldest pairing history will be deleted.
• If the settings are reset to the factory setting, all pairing
history will be deleted.
SN29402593_X-CM56&56D_En.book 27 ページ 2016年5月27日 金曜日 午後3時47分