Controls and displays
04
26
En
10 MCACC SETUP MIC jack
Use to connect the supplied microphone.
11 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
12 Listening mode buttons
AUTO SURR/STREAM DIRECT
– Switches between
Auto surround mode (
Auto playback
on page 30) and
Stream Direct playback. Stream Direct playback
bypasses the bass/treble controls for the most
accurate reproduction of a source (page 33).
HOME THX
– Press to select a Home THX listening
mode (page 31).
STANDARD SURROUND
– Press for Standard
decoding and to switch between the various
2
Pro
Logic IIx and Neo:6 options (page 30).
ADVANCED SURROUND
– Use to switch between
the various surround modes (page 31).
STEREO/A.L.C.
– Switches between stereo playback,
Auto level control stereo mode and Front Stage
Surround Advance modes (page 32).
13 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (see
MULTI-
ZONE listening
on page 61), use these controls to control
the sub zone from the main zone (see
Using the MULTI-
ZONE controls
on page 62).
14 SPEAKERS
Use to change the speaker system (page 59).
15 ST +/–
Use to select preset radio stations (page 36).
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver’s remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
STA
ND
BY
/ON
7 m (23 ft.)
30°
30°
VSX-01TXH_KU.book 26 ページ ２００８年５月７日 水曜日 午後９時２分
