26
> Before start
> Hookup
> Setup
> Playback
> Part Names
Remote Controller
1.
Í
button: Turns the unit on or into standby mode.
2. Input selector buttons: Switches the input to be played.
3.
21
button: Select the input to be played.
4.
(AV ADJUST) button: You can perform common settings on
the TV screen.
5. Cursor buttons and ENTER button: Select the item with the
cursors and press ENTER to confirm your selection.
6.
button: Displays the Home.
7. Volume buttons: Allows you to adjust the volume. This button
also cancels the muting.
8.
button: Temporarily mutes audio. Press again to cancel
muting.
9. LISTENING MODE buttons: Allows you to select the listening
mode.
10.Play button: Used for play operations when playing Music Server
or USB.
11.
button: Used for repeat or random play operations when
playing Music Server or USB.
CLEAR button: Deletes all characters you have entered when
entering text on the TV screen.
12.
(STATUS) button: Switches the information on the display.
13.
button: Returns the display to the previous state.
14.MODE button: Switches tuning to a station between automatic
tuning and manual tuning.
15.+Fav button: Registers a radio station.
9
10
1
2
4
3
6
8
7
5
11
12
14
13
15
30°
30°
Approx.5 m
Display
1. This may light when performing operations with the "NET", "USB"
input selector.
2. Lights in the following conditions.
: When connected by BLUETOOTH.
: When connected by Wi-Fi.
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network
is not correct.
USB: When "USB" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the
USB is not properly connected.
HDMI: When HDMI signals are input and the HDMI input is selected.
DIGITAL: When digital signals are input and the digital input is
selected.
3. Lights according to the type of input digital audio signals and the
listening mode.
4. Lights in the following conditions.
TUNED: Receiving AM/FM radio.
STEREO: Receiving FM stereo.
SLEEP: When the sleep timer is set.
AUTO STBY: Auto Standby is on.
5. Lights when headphones are connected.
6. Flashes when muting is on.
7. Displays various information of the input signals.
8. Lights when adjusting the volume.
9. Speaker/Channel display: Displays the output channel that
corresponds to the selected listening mode.
1
4
7
2
3
8
5 6
9
SN29402193_VSX-101_BAS_En.book 26 ページ ２０１６年１月６日 水曜日 午前１２時２９分
