Pioneer VSX-D709S, Руководство по эксплуатации

Страница: 79 / 84

79
Techno Tidbits & Problem-solving
Cause
• Either the digital connections or the
DIGITAL IN SELECT choices are
incorrect.
• The TAPE2 MONITOR mode is ON.
• The player is paused or stopped.
• There is a mistake in the player
settings for audio output.
• Although it's a Dolby Digital / DTS
source there is a possibility the
present track is not Dolby Digital /
DTS.
Remedy
• Make sure the digital connections and
the DIGITAL IN SELECT choices are
done correctly.
• Press the TAPE2 MONITOR button so
it goes into the OFF setting.
• Play the source.
• Fix the audio settings (check the
manual that came with your DVD
player.
• There is no problem. The indicator
won't light when the track is not a
Dolby Digital / DTS track.
Symptom
You can't get DIGITAL to come
up when using the SIGNAL
SELECT button.
The Dolby Digital / DTS
indicator doesn't light up even
when playing a Dolby Digital /
DTS source.
If the unit does not operate normally due to external effects such as static electricity
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.
*1
*6
Station No.
Station Name
Frequency
Station No.
Station Name
Frequency
CLASS A
CLASS B
CLASS C
Station No.
Station Name
Frequency
Station No.
Station Name
Frequency
Station No.
Station Name
Frequency
Station No.
Station Name
Frequency
STATION CALL button fill in sheet
It's a good idea to make a note of your preset stations.
*1
*6
*1
*6
*2
*7
*2
*7
*2
*7
*3
*8
*3
*8
*3
*8
*4
*9
*4
*9
*4
*9
*5
*0
*5
*0
*5
*0