Pioneer VSX-D509S, Руководство по обслуживанию

Страница: 60 / 61

60
VSX-D509S
VSX-D509S
L R
L
A
R
L R
R L
S
L
B
R
SURROUND
SPEAKERS
FRONT
SPEAKERS
AC OUTLET
FRONT
SPEAKERS
PCM /
2
/ DTS
DIGITAL IN
DIGITAL
OUT
TO
MONTOR
TV
TO
MONTOR
TV
VCR /
DVR
VCR /
DVR
CONTROL
IN
AUX
CD IN
IN IN OUT
OUT
CD - R
/ TAPE
/ MD
SURROUND
CENTER
SUB
WOOFER
SUB
WOOFER
PREOUT
IN
IN
IN
S
IN
S
IN
S
OUT
S
OUT
IN
IN
IN
TV /
SAT
TV /
SAT
DVD
/ LD
DVD
/ LD
CENTER
SPEAKERS
CENTER
PREOUT
COAX OPT1 OPT2 OPT
O
U
T
R
E
C
P
L
A
Y
OUT
FM
UNBAL
75
Ω
AM LOOP
ANTENNA
FM
ANTENNA
DVD 5.1 CH
INPUT
REC PLAY
L
R
L
R
OUTPUT
Connecting Audio Components
To begin set up, connect your audio components to the jacks as shown below. These are all analog connections and your analog
audio components (cassette deck) use these jacks. Remember that for components you want to record with you need to hook up four
plugs (a set of stereo ins and a set of stereo outs), but for components that only play you only need to hook up one set of stereo plugs
(two plugs). To use Digital source features you must hook up your digital components to the digital inputs but it is also a good idea to
hook up your digital components to analog audio jacks. If you want to record to/from digital components (like an MD) to/from analog
components, you must hook up your digital equipment with these analog connections. See p.11-12 for more on digital connections.
When connecting your equipment, always make sure the power is turned off and the power cord is disconnected from the wall outlet.
NOTE
• Only the VSX-D509S has S-video jacks and optical digital out jack.
• The arrows indicate the direction of the audio signal.
7
Audio cords
Use audio cords (not supplied) to connect the audio components.
CD player
CD recorder
or Cassette deck
Cassette deck placement
Depending on where the cassette deck is placed, noise may occur during playback of your cassette deck which is caused by leakage
flux from the transformer in the receiver. If you experience noise, move the cassette deck farther away from the receiver.
Connect red plugs to R (right) and white plugs to L (left).
Be sure to insert completely.
L
R