Pioneer VSX-C501-S, Руководство по обслуживанию

Страница: 106 / 111

VSX-C501-S
106
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Display
1 DIG (digital) / ANA (analog)
Indicates whether the current input source is analog or
digital.
2 MULTI indicator
Lights when the multichannel analog inputs are selected
as the input signal type for the
DVD input.
3 Hi-FS indicator
Lights when the current input signal is 88.2/96 kHz
digital.
4 Sleep timer indicator
Lights when the sleep timer has been set.
5 DIALOG indicator
Lights when Dialog Enhancement is on.
6 Input/output channel indicators
The combined input/output indicators show at a glance
which channels are present in a source and the speakers
that are being used for the output.
The letters L , C , R , LFE , Ls and Rs indicate the input
channels coming into the receiver (left, center, right, low
frequency effect, left-surround and right-surround
respectively).
S lights in Dolby Surround or Surround
Monoaural and when playing Dolby EX or DTS-ES
soundtracks.
The triangular segments and SW (subwoofer) indicate
the active speaker output channels.
7 VIR.SB indicator
Lights when the Virtual Surround Back effect is on.
8 OVER indicator
Lights when the input signal is too high, risking
distortion. Use the input attenuator to reduce the level.
9 Tuner indicators
STEREO
Lights when listening to a stereo FM broadcast in
auto/stereo mode.
TUNED
Lights when tuned to a broadcast.
MONO
Lights when the tuner MPX mode is set to mono.
RDS
Lights when listening to a station that is
broadcasting RDS information.
RF ATT
Lights when the RF attenuator is switched on.
10 Character display
11 EON indicators
EON
lights when EON is set. The dot indicator to the left
lights when the current broadcast carries the EON data
service.
12 Volume level indicator
Indicates the volume level in dB.
1 3 2 5 4 6 8 7
9
10 12 11
MULTI DIALOG
Input indicators Output indicators