Pioneer VSX-934 Скачать руководство пользователя страница 91

Страница: 91 / 153

≫

≫

≫

≫

≫

≫

DSD

This mode is suitable for playing sources recorded in DSD.

•

This unit supports the DSD signal input from the HDMI input terminal.

However, depending on the connected player, better sound may be obtained

by setting the output on the player side to the PCM output.

•

This listening mode cannot be selected if the output setting on your Blu-ray

Disc/DVD player is not set to DSD.

DTS

This mode faithfully reproduces the sound design recorded in the DTS audio

format.

The DTS audio format is a multi-channel digital format developed by DTS, Inc.

This format is an optional audio format for DVD-Video and a standard format

for Blu-ray Discs.It enables recording of 5.1 channels; two front channels, one

center channel, two surround channels, and the LFE channel dedicated to the

bass region (sound elements for the subwoofer). The content is recorded with a

rich volume of data, with a maximum sampling rate of 48 kHz, at a resolution of

24 bits and a bit rate of 1.5 Mbps.

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

DTS 96/24

This mode faithfully reproduces the sound design recorded in the DTS 96/24

audio format.

The DTS 96/24 format is an optional audio format for DVD-Video and Blu-ray

Discs. It enables recording of 5.1 channels; two front channels, one center

channel, two surround channels, and the LFE channel dedicated to the bass

region (sound elements for the subwoofer). Detailed reproduction is achieved by

recording the content at a sampling rate of 96 kHz and at a resolution of 24 bits.

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

DTS Express

This mode faithfully reproduces the sound design recorded in the DTS Express

audio format.

DTS Express is an optional audio format based on 5.1 ch for Blu-ray Discs. It is

possible to record a maximum of 7.1 channels with additional channels such as

the surround back channel. It also supports low bit rates.

•

To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

DTS-HD HR (DTS-HD High Resolution)

This mode faithfully reproduces the sound design recorded in the DTS-HD High

Resolution Audio audio format.

DTS-HD High Resolution Audio is an optional audio format based on 5.1 ch for

Blu-ray Discs. It is possible to record a maximum of 7.1 channels with additional

channels such as the surround back channel at a sampling rate of 96 kHz and at

a resolution of 24 bits.

•

To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

DTS-HD MSTR (DTS-HD Master Audio)

This mode faithfully reproduces the sound design recorded in the DTS-HD

Master Audio audio format.

DTS-HD Master Audio is an optional audio format based on 5.1 ch for Blu-

ray Discs. It is possible to record a maximum of 7.1 channels with additional

channels such as the surround back channel using the lossless audio

reproduction technology. 96 kHz/24 bit is supported for 7.1 ch, and 192 kHz/24 bit

is supported for 5.1 ch.

•

To enable transfer of this audio format, connect via an HDMI cable and set

audio output on the player to Bitstream output.

DTS Neural:X

This listening mode expands actual channels to more channels for playback to

suit the configuration of the connected speakers by expanding the input signals

from 2 channels or 5.1 channels to 5.1 channels or 7.1 channels respectively.

•

This mode cannot be selected when Dolby signal is input.

DTS Virtual:X

(Firmware version supporting DTS Virtual:X)

DTS Virtual:X listening mode uses the proprietary audio processing technology

to create spacious 3D sound including audio from up above without connecting

height speakers.

Содержание VSX-934


























































































































































Результаты поиска

Содержание VSX-934

Отзывы:

Похожие инструкции для VSX-934

Бренды по названию

Популярные бренды

Pioneer VSX-934, Инструкция по эксплуатации

Результаты поиска

Содержание VSX-934

Отзывы:

Похожие инструкции для VSX-934

Бренды по названию

Популярные бренды