background image

Additional information

13

92

En

Manufactured under license from Dolby Laboratories. 

Dolby

”, “

Pro Logic

”, “

Surround EX

” and the double-D 

symbol are trademarks of Dolby Laboratories.

DTS

The DTS technologies are explained below. See 
www.dtstech.com for more detailed information.

DTS Digital Surround

DTS Digital Surround is a 5.1-channel audio coding 
system from DTS Inc. now widely used for DVD-Video, 
DVD-Audio, 5.1 music discs, digital broadcasts, and 
video games. It can deliver up to six discrete audio 
channels, comprising five full range channels, including 
an LFE channel. Higher sound quality is achieved 
through the use of a low compression rate, and high 
rates of transmittance during playback.

DTS-ES

DTS-ES (the ES stands for Extended Surround) is a 
decoder that is capable of decoding both DTS-ES 
Discrete 6.1 and DTS-ES Matrix 6.1 encoded sources. 
DTS-ES Discrete 6.1 gives ‘true’ 6.1 channel sound, with 
a completely separate (discrete) surround back channel. 
DTS-ES Matrix 6.1 has a surround back channel matrixed 
into the surround left/right channels. Both sources are 
also compatible with a conventional DTS 5.1 channel 
decoder.

DTS Neo:6

DTS Neo:6 can generate 6.1 channel surround sound 
from any matrixed stereo source (such as video or TV) 
and from 5.1 channel sources. It uses both the channel 
information already encoded into the source, as well as 
its own processing to determine channel localization 
(with two channel sources, the “.1” subwoofer channel is 
generated by bass management in the receiver). Two 
modes (Cinema and Music) are available using DTS 
Neo:6 with two channel sources.

DTS 96/24

DTS 96/24 is an extension of the original DTS Digital 
Surround which offers high quality 96 kHz/24-bit audio 
using a DTS 96/24 decoder. This format is also fully 
backward compatible with all existing decoders. This 
means that DVD players can play this software using a 
conventional DTS 5.1 channel decoder.

DTS-EXPRESS

DTS-EXPRESS is a low-bitrate encoding technology 
supporting up to 5.1 channels with fixed data transfer 
rates. This format is incorporated with sub audio on HD 
DVD and secondary audio on Blu-ray Disc while boasting 
the potential applicability to upcoming broadcasts and 
memory audio contents.

DTS-HD Master Audio

DTS-HD Master Audio is a technology that delivers 
master audio sources recorded in a professional studio 
to listeners without any loss of data, preserving audio 
quality. DTS-HD Master Audio adopts variable data 
transfer rates, facilitating data transfer to the maximum 
rate of 24.5 Mbps in the Blu-ray disc format, 18.0 Mbps in 
the HD-DVD format, which by far exceeds that of a 
standard DVD. These high data transfer rates enable 
lossless transmission of 96 kHz/24-bit 7.1-channel audio 
sources without deteriorating the quality of the original 
sound. DTS-HD Master Audio is an irreplaceable 
technology that can reproduce sound faithfully as 
intended by the creator of music or movies.

Manufactured under license under U.S. Patent #’s: 
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 
6,487,535 & other U.S. and worldwide patents issued & 
pending. DTS is a registered trademark and the DTS logos, 
Symbol, DTS-HD and DTS-HD Master Audio are 
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights 
Reserved.

Windows Media Audio 9 Professional

Windows Media Audio 9 Professional (WMA9 Pro) is a 
discrete surround format developed by Microsoft 
Corporation. 

WMA9 Pro can support up to 5.1/7.1 channel playback 
with sampling rates up to 24-bit/96 kHz. Using the unique 
WMA compression techniques, WMA9 Pro can deliver 
multichannel music and soundtracks over high-speed 
internet networks at low bit rates with minimal audio 
degradation. Playback may be enjoyed with the Windows 
Media™ Player 9 Series (or above) and other third-party 
media players on a personal computer, or with an AV 
amplifier with on-board WMA9 Pro decoding.

Windows Media and the Windows logo are trademarks or 
registered trademarks of Microsoft Corporation in the 
United States and/or other countries.

VSX-9130TXH_KU.book  92 ページ  2008年4月17日 木曜日 午前11時26分

Содержание VSX-9130TXH-K - 140 Watts A/V Receiver









































































































Отзывы: