background image

54

Front Panel

   Rear Panel

   Remote

Contents 

  Connections 

  

Playback

 

  Setup 

 

„

AUTO/DIRECT button

Press repeatedly and the listening modes suited to the input signal are switched 

between "Auto Surround", "Direct", and "Pure Direct". After selecting one of them, 

"Auto Surround" (or "Direct" or "Pure Direct") is displayed, then the most suitable 

listening mode for the audio format is selected automatically (DTS for multi-

channel input signals, Stereo for 2 channel input signals, etc.) and an indicator 

such as "DTS" is displayed on the display.

The display changes automatically.

The "Direct" mode shuts down some processing that can affect sound quality, 

such as the tone control features, so you can enjoy even better sound quality. 

The "Pure Direct" mode shuts down even more processes that affects sound 

quality, so you get a more faithful reproduction of the original sound. In this case, 

the speaker calibration made with MCACC is invalid.

 

„

SURR button

By pressing repeatedly you can select the audio format of the signals being input 

and switch between a variety of listening modes. Select the mode that suits your 

preference. The selected listening mode is displayed on the display.

 

„

STEREO button

You can select the "Stereo" mode to playback only from the front speakers and 

subwoofer.
For details on the effects of each of the listening modes see "Listening Mode 

Effects". For listening modes selectable for each of the audio formats in the input 

signals, refer to "Input Formats and Selectable Listening Modes

".

Содержание VSX-834









































































































Отзывы: