99
> Specifications
> Settings
> Listening Modes
> Playback Function
> Basic Manual
Troubleshooting
|
Appendix
■
Crossover
Setting Item
Default Value
Setting Details
Front
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
•
If "System Setup" - "Speaker" - "Configuration"
- "Subwoofer" is set to "No", "Front" will be
fixed to "Large" and the low pitched range of
the other channels will be output from the front
speakers. Refer to the instruction manual of
your speakers to make the setting.
Center
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
•
When "Front" is set to "Small", this is set to
"Small".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surround
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
•
When "Front" is set to "Small", this is set to
"Small".
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Setting Item
Default Value
Setting Details
Crossover
80Hz
When there are speakers that have been set to "Small",
set the Hz under which you would like other speakers to
play bass, and also set Hz under which you would like
the LFE (low frequency effect) to play the bass.
The value from "50Hz" to "200Hz" can be set.
Double Bass
Off
This can be selected only when "System Setup" -
"Speaker" - "Configuration" - "Subwoofer" is set to
"Yes" and "Front" is set to "Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
•
The setting will not automatically be configured
even if you performed Full Auto MCACC.
Содержание VSX-831
Страница 23: ...23 ...