VSX-417-K
88
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Remote control
1 RECEIVER
Illustration shows the VSX-817 model
Switches the receiver between standby and on.
1
3
4
2
5
6
7
8
9
10
11
12
13
2 Listening mode buttons
AUTO SURR
Switches between Auto surround mode
(Auto playback) and Stream Direct playback.
Stream Direct playback bypasses the tone
controls for the most accurate reproduction
of a source.
STANDARD
Press for Standard decoding and to switch
between
2
Pro Logic II options.
STEREO/F.S.SURR
Switches between stereo playback and
Front Stage Surround Advance modes.
ADV.SURR
Switches between the various surround
modes.
3 TOP MENU
Displays the disc "top" menu of a DVD.
MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness listening.
4 TUNER EDIT*
Memorizes/names stations for recall.
SETUP
Press to access the System Setup menu.
Also functions as the
SETUP
button for DVD/DVR units.
5 RECEIVER CONTROL buttons
/-
Use to set the listening volume.
EFFECT/CH SEL
Press repeatedly to select a channel, then
use
LEVEL +/-
to adjust the level.
Also adjusts the level of the Advanced
Surround effects as well as Dolby Pro Logic
IIx Music/Dolby Pro Logic II Music and
(VSX-817 only) Neo:6 music parameters.
You can then use the
LEVEL +/-
buttons to
make these adjustments.
LEVEL +/-
Use to adjust the effect and channel levels.
MUTE
Mutes/unmutes the sound.
6 SHIFT
Press to access the "boxed" commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (*) in this section.
7 SLEEP
Press to change the amount of time before
the receiver switches into standby (
30 min
- 60 min - 90 min - Off
). You can check the
remaining sleep time at any time by
pressing
SLEEP
once.
DIMMER
Dims or brightens the display.
PHASE
Press to switch on/off Phase Control.
ANALOG ATT*
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
8 INPUT SELECTOR buttons
Press to select an input source.
DVD/DVR
Press to use the remote DVD/DVR controls.
RECEIVER
Use to switch to the receiver controls on
the remote control. Use when setting up
surround sound for the receiver.