Firmware
5
4
3
2
1
6
D
C
A
B
D
C
A
B
5
4
3
2
1
6
How to Update (HDMI Sub MCU) 3/5
VSX-330
for HDMI & CEC (SUB) microcomputer
1
2
3
4
[Procedures]
To perform updating, proceed as follows:
1.
Set the values for Target MCU and Crystal Frequency, as
follows:
Target MCU: MB9AF156M/N/R
1
Crystal Frequency: 4MHz
2
2. Specify the software file to be updated.
Click on "Open"
3
to open the File Selection window.
Select Intel Hex files (*.hex) in File Type
3. Specify the COM PORT.
Click on "Set Environment" 4 to open the Environment Setting window.
Assign the COM PORT number
5
, according to the environment.
Click on "OK"
6
to close the Environment Setting window.
5
6
7
Click on "Full Operation (D+E+B+P)"
7
.
5. After the window shown below is displayed, turn the main unit on.
6.
Press the Reset button of the updating jig for updating.
7.
When it is appeared below window, Then power turn on unit (ON)
8.
Click on "OK"
8
.
8
