Pioneer VSX-1120-K, Руководство по эксплуатации

Страница: 65 / 108

Controlling the rest of your system 09
65
En
Simila r to Multi o p e r ations, System off allows you to use
two buttons to sto p and switch off a se r ies of com p onents
in you r system at the same time.
1
Only one System off
o p e r ation sequence may be pr og r ammed.
P r ess MULTI OPERATION and then

SOURCE to:
1. T r ansmit a sequence of u p to five pr og r ammed
commands.
2. Switch off all Pionee
r devices including the r eceive r
(exce p t DVD r eco r de r s and VCRs).
Fo r g r eate r convenience, pr og r am this r eceive r to
p e r fo r m p owe r on/off and p layback o p e r ations on non-
Pionee r devices as well.
2
(The signals fo r Pionee r devices
desc r ibed above a r e not contingent on pr og r amming fo r
non-Pionee r devices.)
The buttons that can be pr og r ammed using Multi
o p e r ation o r System off a r e the same buttons as those
that can be pr og r ammed fo r othe r r emote cont r ols (see
Programming signals from other remote controls
on
p age 63).
Programming a Multi operation or a
shutdown sequence
1 Press and hold R.SETUP, then press “3” for three
seconds.
The LED flashes continuously.
• To cancel the pr eset setu p mode pr ess R.SETUP .
2 Press the input function button (or

SOURCE
button).
For Multi operations,
pr ess the in p ut function you wish to
pr og r am (fo r exam p le, if you want to sta r t the sequence
by switching on you r DVD p laye r , pr ess DVD )
3
.
For System off,
pr ess the  SOURCE button.
The LED blinks twice and flashes continuously.
3 If necessary, press the input function button for the
component whose command you want to input.
This is only necessa r y if the command is fo r a new
com p onent (in p ut function).
4 Select the button for the command you want to
input.
The LED blinks once and flashes continuously.
• You don’t need to pr og r am the r eceive r to switch on
o r off. This is done automatically.
With Pionee r com p onents, you don’t need to pr og r am
the p owe r to switch off in a shutdown sequence (exce p t
DVD r eco r de r s).
5 Repeat steps 3 to 4 to program a sequence of up to
five commands.
If you pr ess R.SETUP befo r e pr og r amming is com p leted,
commands pr og r ammed u p to that p oint will be sto r ed.
6 Press R.SETUP to exit the programming mode.
Using multi operations
1 Press MULTI OPERATION.
The LED flashes continuously.
2 Within five seconds, press an input function
button that has been set up with a multi operation.
The r eceive r switches on (if it was in standby) and the
pr og r ammed multi o p e r ation is p e r fo r med automatically.
Using System off
1 Press MULTI OPERATION.
The LED flashes continuously.
2 Within five seconds, press

SOURCE.
The command sequence you pr og r ammed will r un, then
all Pionee r com p onents will switch off
4
, followed by this
r eceive r (switch of all the zones becomes off).
Erasing the settings for the multi-operation
This e r ases all the settings pr og r ammed in the r emote
cont r ol fo r the multi-o p e r ation.
1 Press and hold R.SETUP, then press “8” for three
seconds.
The LED flashes continuously.
• To cancel the pr eset setu p mode pr ess R.SETUP .
2 Press the input function button containing the
program you want to cancel or the

SOURCE button
for three seconds.
If the LED lights fo r one second, the e r asing has been
successfully com p leted.
Note
1 • Befo r e Multi o p e r ation and System off will wo r k co rr ectly, you must setu p the r emote to wo r k with you r TV and othe r com p onents (see
Operating multiple receivers
on p age 62 fo r mo r e on this).
• Some units may take some time to p owe r u p , in which case multi p le o p e r ations may not be p ossible.
• Powe r on and off commands only wo r k with com p onents that have a standby mode.
2 Some r emote cont r olle r s fo r othe r manufactu r e r s' devices use the same signals fo r switching the p owe r on and off. In some cases, even if this
r eceive r is pr og r ammed to p e r fo r m these commands, p owe r to the non-Pionee r devices may not be switched on and off co rr ectly. P r og r am
the r eceive r to p e r fo r m these commands if the non-Pionee r device uses se p a r ate signals fo r p owe r on/off.
3 With Multi o p e r ation, the
HDMI
and
TV CTRL
settings cannot be made. Fo r othe r settable in p ut functions, see
Setting the remote to control
other components
on p age 62.
4 In o r de r to avoid accidently switching off a DVD r eco r de r that is cu rr ently r eco r ding, no DVD r eco r de r p owe r off codes a r e sent.
VSX-1120_UXJCB.book 65 ページ ２０１０年３月１０日 水曜日 午後２時２分