![Pioneer VSX-1018AH-K Скачать руководство пользователя страница 66](http://html.mh-extra.com/html/pioneer/vsx-1018ah-k/vsx-1018ah-k_service-manual_330701066.webp)
66
VSX-LX51
1
2
3
4
A
B
C
D
E
F
1
2
3
4
[3] Error indications when an abnormality in the amplifier system is detected
[Purpose]
[Error Messages]
FL Display
W
hen a thermal shutdown (abnormal
temperature), etc. is detected
W
hen AMP DC is detected
Flashes 3 times.
Flashes 3 times.
Status
Duration
(sec.)
An error message is displayed when an abnormality in the amplifier system is detected.
After a failure is detected, the shutdown process starts,
then the power will be off. The power can be turned on
again in
N
ormal mode.
AMP ERROR
: After a failure in the amplifier block or high DC output is detected, the shutdown process starts, then
the power will be shut off. Then the MCACC LED will flash. The power cannot be turned on again.
If you wish to turn on the unit after a shutdown activated by DC detection, enter DC detection
cancellation mode, by proceeding with the steps described in "How to enter release mode" below.
AMP O
V
ERHEAT : The temperature of the amplifier is
abnormally
high.
12
V
TRG ERR
: The 12
V
trigger output is short-circuited.
HDMI
N
G
: There is no communication response from the HDMI u-com.
HDCP ERR
: The monitor is non-HDCP type or the monitor is standby state.
N
OT SUPPORT : The output resolution is not correspond to the monitor at analog. –>HDMI(scaler exist)
USB ERROR1
: The connected USB device is overload
[Description]
[How to enter release mode]
Press and hold "STA
N
DBY/O
N
" and "AUTO SURR" keys
on the front panel simultaneously for 2 seconds in standby mode.
W
hen the 12
V
trigger circuit is
short-circuited
Flashes
W
hen an error is detected during
communication with the HDMI microcomputer
Flashes
W
hen an HDCP ERR is detected.
Flashes 5 seconds.
W
hen the monitor outputs a non
supported video format.
W
hen the overload USB device(over 500mA)
is connected
Flashes
Flashes
Содержание VSX-1018AH-K
