−
16
−
English
Recommended Installation Position on Rear Windscreen
When installing the 2nd camera on the inside of the rear window, installation in a vehicle and in a
position that satisfies all of the following conditions is recommended.
• A position where the lens part of the 2nd camera is within the wiping range of the wiper.
• A position where the 2nd camera faces in the horizontal direction to the rear and side to side.
• A position where the lens part of the 2nd camera and the double-sided tape do not overlap the heating
wires.
• A position where the 2nd camera connection cable can be routed without unnecessary force.
2nd camera
Rear windscreen
Connection cable
Heating wires
Wiping range of the rear wiper
1 Clean the installation area of dirt and oils using the included cleaning cloth.
Front windscreen
Rear windscreen
2 Install this product.
① :
Set the mounting bracket on this product.
② :
Peel off the double-sided tape release paper from the mounting bracket.
③ :
Install at the specified position of the front windscreen.
2
1
3
Front
Windscreen
Firmly push
this product.
CAUTION
• Make sure that the surface of the front windscreen is dry before applying the tape.
• Firmly push the area around the LCD. Next, remove this product from the mounting bracket, directly
press the mounting bracket against the tape. In this way, the product can be firmly installed on the
windscreen.
• Never touch the surface of the LCD.
