!
Do not store the battery with metallic objects.
!
If the battery leaks, wipe the remote control
completely clean and install a new battery.
!
When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions
’
rules that apply in your
country/area.
!
“
Perchlorate Material
–
special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A.)
”
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
The remote control may not function properly
in direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list/category (the folder/ca-
tegory one level higher)
1
Press
DISP
/
/
SCRL
.
Returning to the main menu
Returning to the top tier of list/category
1
Press and hold
DISP
/
/
SCRL
.
Returning to the ordinary display
Canceling the initial setting menu
1
Press
BAND
/
ESC
.
Returning to the ordinary display from the list/cate-
gory
1
Press
BAND
/
ESC
.
Tuner
Basic Operations
1 2
4
5
3
6
1
Band indicator
2
5
(stereo) indicator
3
LOC
indicator
Appears when local seek tuning is on.
4
Preset number indicator
5
Signal level indicator
6
Frequency indicator
Selecting a band
1
Press
BAND
/
ESC
until the desired band (
FM-1
,
FM-2
,
FM-3
for FM or
AM
) is displayed.
Manual tuning (step by step)
1
Push
M.C.
left or right.
Seeking
1
Push and hold
M.C.
left or right.
You can cancel seek tuning by pushing
M.C.
left
or right.
While pushing and holding
M.C.
left or right, you
can skip stations. Seek tuning starts as soon as
you release
M.C.
Storing and recalling stations
You can easily store up to six stations for each
band as presets.
1
Press
(list).
Preset screen is displayed.
2
Use M.C. to store the selected fre-
quency in memory.
Turn to change the preset number. Press and
hold to store.
3
Use M.C. to select the desired station.
Turn to change the station. Press to select.
Operating this unit
En
8
Section
02
