!
Do not connect this lead to the system con-
trol terminal of external power amps.
!
Be sure not to use this lead as the power
supply lead for the auto-antenna or anten-
na booster. Such connection could cause
excessive current drain and malfunction.
Notice for the blue/white lead
!
When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp
’
s system remote control term-
inal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the audio source is switched off.
!
Do not connect this lead to the auto-anten-
na relay control terminal or the antenna
booster power control terminal.
!
Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.
Parts supplied
Parts marked (*) are not supplied with AVIC-
X710BT.
The navigation unit
Power cord
Connector*
Extension lead
(for reverse signal)
Extension lead*
(for speed signal)
GPS antenna
RCA connector
Microphone
Connecting the System
En
7
English
Section
03
