Basic Operations
Turning the unit on and
selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to the next page).
%
Press SOURCE to select a source.
Press
SOURCE
repeatedly to switch between
the following sources:
Built-in CD player
Tuner
When you select a source, the unit is turned
on.
Notes
!
When no disc has been set in the unit, the
source will not switch to the built-in CD player.
!
When this unit
s blue/white lead is connected
to the vehicle
s auto-antenna relay control
terminal, the vehicle
s antenna extends when
this unit
s source is turned on. To retract the
antenna, turn the source off.
Adjusting the volume
%
Use VOLUME to adjust the sound level.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
Tuner
Listening to the radio
1 Press SOURCE to select the tuner.
2 Press BAND to select a band.
Press
BAND
until the desired band (
F1
,
F2
,
F3
for FM or
AM
) is displayed.
3 To perform manual tuning, briefly press
c
or
d
.
4 To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling broadcast
frequencies
If you press any of the preset tuning buttons
1
6
you can easily store up to six broadcast
frequencies for later recall with the touch of a
button.
!
Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1
6 and hold until the
preset number stops flashing.
The selected radio station frequency is stored
in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
%
Press LOCAL/BSM repeatedly to turn
local seek tuning on or off.
When local seek tuning is on,
LOC
appears in
the display.
Operating this unit
En
7
English
Section
03
All manuals and user guides at all-guides.com
