28
En
Updating the firmware
Important
!
Cannot be updated if the unit is using batteries. Connect the unit to an AC adaptor, and update after connecting the unit to a PC.
!
Do not in any circumstances unplug the power cord until “Update completed.” is displayed when the firmware is being updated in accordance with
the 7 steps below.
!
Firmware updates may take more than the time described below depending on your network environment.
1 Turn on the PC and launch the MIXTRAX.
2 Connect the AC adapter to the device and turn the power on.
3 Use the supplied USB cable to connect the PC to the ‘PC connect’ terminal on rear panel of this device.
4 Press the “Check for updates.” button on MIXTRAX.
5 Operate according to the instructions displayed on the MIXTRAX screen.
“Preparations for the update of the device
’
s firmware is complete.” will be displayed on the MIXTRAX screen.
6 Remove the device from the PC.
When removing the device from the PC, do so according to the correct way for removing USB devices from PCs.
7 The device’s firmware update will start. Please wait.
Do not unplug the power cord until the firmware update is completed.
!
The unit will restart automatically during update.
!
Update progress can be confirmed with the power indicator (LED) and the indication on the display.
<Unit while firmware being updated>
LED
Display
Checking firmware
flashing
“Updating the software. Never unplug the power cord.”
↓
(May take about 10 minutes)
Updating
flashing
off
↓
(May take several minutes)
Update completed
on
“Update completed.”
8 Firmware update is completed.
If the power indicator lights up and “Update completed.” is displayed, the unit’s firmware update has been successful.
