14
EN
Putting the Sensor on Your Body
Do not use this product if you are using a pacemaker.
1.
Wet the electrode pad with
water.
To reliably detect the heart rate signal,
wet the electrode pad with water.
2.
Install the transmitter to the
strap.
Firmly attach the snap fasteners of the
transmitter and strap until they click.
To prevent the transmitter from
•
falling off while you use it, attach it
securely.
Before riding, confirm that the snap
•
fasteners are not loose. If they are
loose, replace them.
3.
Adjust the length of the strap.
Undo the strap’s hook, and use the clip
to adjust the strap’s length.
lengthen
shorten
4.
Wear the strap around your
chest.
Wrap the strap around your chest and
attach the hook to the strap.
Adjust the strap’s length with the clip
again.
Содержание SGY-HR500
Страница 21: ...21 EN ...