15
EN
Installation on Your Bike
Mount the Speed & Cadence sensor, cadence magnet, and speed magnet on
your bike.
Pairing with the cyclocomputer may not be possible due to the influence of the
●
2.4 GHz frequency band. If pairing fails, try again someplace where there is no
interference from microwaves, radio waves, or wireless equipment.
Do not use magnets other than the enclosed ones.
●
Installing the Cadence Magnet
1.
Remove the pedal from the
crank.
2.
Install the cadence magnet to
the crank.
Install it so the magnet part is facing to
the chain stay side.
Chain stay
Magnet
The magnet can be installed to a
•
crank that is from about 85 mm up to
100 mm in circumference.
Before installing, be sure your crank
•
does not have an irregular shape that
would prohibit secure installation.
Be careful not to get injured when
•
installing the cadence magnet.
After installing the cadence magnet,
•
confirm that it is not cracked. If it is
cracked, do not use it.
