10
> Before start
> Hookup
> Setup
> Playback
> Part Names
2
1
3/8˝
(10 mm)
1
Speaker cable,
2
Subwoofer cable
in case of:
Pages 5 to 7
Connect
123456
9:
. Up to two powered
subwoofers can be connected. The same signal is output
from each of the SUBWOOFER jacks.
0
Apart from these connections, you can also connect
surround back speakers
7
and
8
. However, you can
only output audio from one set of
78
or
9:
at a time.
When you have connected both, you can select which
speakers to prioritize with "Speakers" (
P26) in the AV
Adjust.
Make sure the exposed wires of the speakers do not stick out of
the speaker terminals when connecting. If the exposed wires of
the speakers touch the rear panel or the + and – wires touch each
other, the protection circuit will be activated.
Setup
0
Settings for the speaker configuration you have
connected need to be made in "1. Full Auto
MCACC" (
P20) in Initial Setup. Note that if you
are using height speakers, set "Speaker Channels"
to "5.1.2 ch" in the setting screen. Select "7.1.2 ch"
if you have connected both surround back
speakers and height speakers.
SN29402384_SC-LX501_BAS_En.book 10 ページ ２０１６年４月２１日 木曜日 午前１１時４６分
