background image

2

En

CENTER SPEAKER

The speaker should be positioned below the TV. For best 

results align the front of the speaker with the front of the 

TV. If the speaker is placed under the TV and very close to 

the floor, then tilting upwards may be beneficial.
Do not place the center speaker on top of TV, the speaker 

may fall from the TV due to external shocks such as 

earthquakes, endangering those nearby or damaging the 

speaker.

SURROUND SPEAKERS

For best results the speakers should be positioned at or 

above ear level. Depending upon your room layout and 

preferences, the left and right rear speakers should be 

positioned on the side walls just the rear of the listening 

position, or on the walls.

STANDARD SURROUND SETUP

This is a standard multichannel surround sound speaker 

setup for optimal 5.1 channel home theater sound.

NON-SKID PADS

If the front, center and surround speakers are placed on 

a hard surface, such as wood or tile place four non-skid 

pads on the bottom flat surface of the speakers.  

MAKING AMPLIFIER SETTINGS

Before connecting the speakers, please read the

operating instructions supplied with your amplifier to 

select the speaker setting of amplifier :

• FRONT SPEAKERS : LARGE

• CENTER / SURROUND SPEAKERS : SMALL

CONNECTING YOUR SYSTEM

Make sure all equipment is turned off before making any 

connections.

• Correct wiring of your speakers is essential for 

achieving the best sound quality. Be careful to 

ensure proper polarity of connection.

Connect to the speaker terminals on the rear of 

the amplifier.

Connect the striped speaker cord to the red (+) terminal 

and the other cord to the black (–) terminal as shown 

below (for more details, refer to your amplifier instruction 

manual).

Connect to the speaker terminals on the front of 
the speakers.

Attach one end of the supplied speaker cord to the rear 

of the each speaker. Connect the wire with the colored 

marker to the red (+) terminal; the plain wire to the black 

(–) terminal. Loosen the knobs on the input terminals and 

insert the speaker cable wires into each of the terminal 

post holes, then tighten the knobs. 

Surround left

Surround right

Center

Front

left

Listening position

Front

right

Subwoofer

Center speaker

Surround speakers

Front speaker

CAUTION

These speaker terminals carry HAZARDOUS LIVE 
voltage. To prevent the risk of electric shock when 
connecting or disconnecting the speaker cables, 
disconnect the power cord before touching any 
uninsulated parts.

D3-4-2-2-3_A1_En

Speakers

Amplifier

Red colored marker

Black

Red

S-RS88TB_En.fm  2 ページ  2014年6月19日 木曜日 午後4時24分

Содержание S-RS88TB

Страница 1: ...y shielded and so should not be placed near a TV or monitor as the interaction of magnetic materials can cause distortion of the colors on your TV screen Magnetic storage media such as floppy discs and tape or video cassettes should also not be kept close to these speakers If this happens turn off the television then turn it on again after 15 min to 30 min If the problem persists place the speaker...

Страница 2: ...plifier FRONT SPEAKERS LARGE CENTER SURROUND SPEAKERS SMALL CONNECTING YOUR SYSTEM Make sure all equipment is turned off before making any connections Correct wiring of your speakers is essential for achieving the best sound quality Be careful to ensure proper polarity of connection Connect to the speaker terminals on the rear of the amplifier Connect the striped speaker cord to the red terminal a...

Страница 3: ...ling Pass and tie two reinforced strings through the plastic catches and fasten the speaker to the wall as shown above If you are unsure of the quality and strength of the walls consult a professional for advice Pioneer is not responsible for any accidents or damage that result from improper installation CABINET MAINTENANCE Use a polishing cloth or dry cloth to wipe off dust and dirt When the cabi...

Страница 4: ...kHz Sensitivity 1m 1W 83 8 dB Maximum input power 120 W Exterior dimensions 280 W mm x 130 H mm x 183 D mm Weight 2 3 kg CENTER SPEAKER Enclosure Bass reflex bookshelf type Configuration 1 way Speakers Fullrange 10 cm Cone type x2 Impedance 8 Ω Frequency response 45 Hz to 15 kHz Sensitivity 1m 1W 87 7 dB Maximum input power 120 W Exterior dimensions 400 W mm x 130 H mm x 183 D mm Weight 4 0 kg SUP...

Отзывы: