Pioneer S-HTD530, Руководство по эксплуатации

Страница: 88 / 104

Additional information 12
88
En
This system is designed for use with
conventional, fully circular discs only. Use of
shaped discs is not recommended for this
product. Pioneer disclaims all liability arising
in connection with the use of shaped discs.
Proper installation and
maintenance of this system
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Don’t...
Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
Place on a window sill or other place
where the system will be exposed to direct
sunlight.
Use in an excessively dusty or damp
environment.
Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
Use in a kitchen or other room where the
system may be exposed to smoke or
steam.
Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the system unit.
Place on an unstable surface, or one that
is not large enough to support all four of
the system unit’s feet.
Cleaning the pickup lens
The DVD player’s lens should not become
dirty in normal use, but if for some reason it
should malfunction due to dust or dirt,
consult your nearest Pioneer authorized
service center. Although lens cleaners are
commercially available, we do not
recommend using them since some may
damage the lens.
Problems with condensation
Condensation may form inside the system
unit if it is brought into a warm room from
outside, or if the temperature of the room
rises quickly. Although the condensation
won’t damage the system, it may temporarily
impair its performance. For this reason you
should leave it to adjust to the warmer
temperature for about an hour before
switching on and using.
Moving the system unit
If you need to move the main unit, first remove
all discs, then press
STANDBY/ON on the
front panel to turn the system off. Wait for
Good Bye to disappear from the display, then
unplug the power cable. Never lift or move the
system during playback—discs rotate at a
high speed and may be damaged.
• Unplugging the system before Good Bye
disappears from the display may cause
the system to return to the factory
settings.
XV-HDT530.book 88 ページ ２００３年５月１０日 土曜日 午後４時６分