background image

2

En

Thank you for buying this PIONEER product. Please read through these operating instructions so 
you will know how to operate your model properly. After you have finished reading the instructions, 
put them away in a safe place for future reference.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT

D3-4-2-1-1_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space 
around the unit for ventilation to improve heat radiation 
(at least 10 cm at top, 10 cm at rear, and 10 cm at each 
side).

WARNING

Slots and openings in the cabinet are provided for 
ventilation to ensure reliable operation of the product, 
and to protect it from overheating. To prevent fire 
hazard, the openings should never be blocked or 
covered with items (such as newspapers, table-cloths, 
curtains) or by operating the equipment on thick carpet 
or a bed. 

   

D3-4-2-1-7b*_A1_En

Operating Environment

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH 
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in 
locations exposed to high humidity or direct sunlight (or 
strong artificial light) 

D3-4-2-1-7c*_A1_En

WARNING

This equipment is not waterproof. To prevent a fire or 
shock hazard, do not place any container filled with 
liquid near this equipment (such as a vase or flower 
pot) or expose it to dripping, splashing, rain or 
moisture.  

 

D3-4-2-1-3_A1_En

WARNING

Before plugging in for the first time, read the following 
section carefully.

The voltage of the available power supply differs 
according to country or region. Be sure that the 
power supply voltage of the area where this unit 
will be used meets the required voltage (e.g., 230 V 
or 120 V) written on the rear panel.

D3-4-2-1-4*_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame 
sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

This product is for general household purposes. Any 
failure due to use for other than household purposes 
(such as long-term use for business purposes in a 
restaurant or use in a car or ship) and which requires 
repair will be charged for even during the warranty 
period.  

 

K041_A1_En

IMPORTANT NOTICE

THE MODEL NUMBER AND SERIAL NUMBER OF 
THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.
RECORD THESE NUMBERS ON YOUR ENCLOSED 
WARRANTY CARD AND KEEP IN A SAFE PLACE 
FOR FUTURE REFERENCE. 

D36-AP9-1_A1_En

Information to User

Alterations or modifications carried out without 
appropriate authorization may invalidate the user’s 
right to operate the equipment. 

D8-10-2_A1_En

CAUTION

The 

POWER

 switch on this unit will not completely 

shut off all power from the AC outlet. Since the power 
cord serves as the main disconnect device for the 
unit, you will need to unplug it from the AC outlet to 
shut down all power. Therefore, make sure the unit 
has been installed so that the power cord can be 
easily unplugged from the AC outlet in case of an 
accident. To avoid fire hazard, the power cord should 
also be unplugged from the AC outlet when left 
unused for a long period of time (for example, when 
on vacation).     

D3-4-2-2-2a*_A1_En

If the AC plug of this unit does not match the AC 
outlet you want to use, the plug must be removed 
and appropriate one fitted. Replacement and 
mounting of an AC plug on the power supply cord of 
this unit should be performed only by qualified 
service personnel. If connected to an AC outlet, the 
cut-off plug can cause severe electrical shock. Make 
sure it is properly disposed of after removal.
The equipment should be disconnected by removing 
the mains plug from the wall socket when left unused 
for a long period of time (for example, when on 
vacation).  

 

D3-4-2-2-1a_A1_En

S-31W_En.book  2 ページ  2012年1月17日 火曜日 午前9時28分

Содержание S-31W









Отзывы: