manualshive.com logo in svg

Pioneer Remix station RMX-1000, Руководство по обслуживанию

Поделиться
Скачать
Pioneer Remix station RMX-1000 Скачать руководство пользователя страница 65

65

RMX-1000

5

6

7

8

5

6

7

8

A

B

C

D

E

F

8. EACH SETTING AND ADJUSTMENT

8.1  NECESSARY ITEMS TO BE NOTED

It is recommended that you back up the data of the user effect parameters that are stored in this unit before starting repair.
For details on how to back up, see "

8

.3 HO

W

 TO IMPORT/EXPORT USER SETTI

N

G DATA."

After repairing, be sure to check the version of the firmware (see “Mode 1: For confirmation of the version” in “TEST MODE”), 
and if it is not the latest one, update to the latest version.

W

hen the following parts are replaced, confirmation of the version of the firmware, updating to the latest version of the 

firmware.

If the mechanical members of the RELEASE FX lever are disassembled then reassembled, with or without part replacement, 
be sure to perform calibration of the RELEASE FX lever.

Replacement of mechanical members, repair of the SPFX Assy, etc.
(Other than replacement of parts, in a case where any of the screws specified in the figure below is removed)

• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Calibration of the RELEASE FX lever

• MAI

N

 Assy

 (FLASH: 

IC2501)

• P

N

CE Assy

  (K0R UCOM: IC7002)

Specific mechanical elements for which recalibration is re

q

uired after their disassembly

W

hether calibration is OK or not can be judged from lighting of the RELEASE FX indicator LEDs:

 

N

o LED lit:  

Perpendicular position (state where the lever is not touched)

 

One LED lit:  

W

hen the lever is tilted by 15°

 

 

(Check that one LED lights when the lever is tilted halfway to a position where its load changes.)

 

Three LEDs lit:  

W

hen the lever is tilted by 30°

 

 

(

W

hen the lever is fully tilted)

Judgment of the result (OK/NG) of calibration and measures to be taken when the calibration check is NG

In a case where the result of the above-mentioned calibration check is NG

1

 Recalibration 

→

 If the LEDs light properly, calibration is OK.

 

 

→

 If the LEDs do not light properly, go to 

2

.

2

  Replacement of mechanical members, 

→

 If the LEDs do not light properly, go to 

3

.

     repair of the SPFX Assy

3

 Recalibration 

→

 If the LEDs light properly, calibration is OK.

 

 

→

 If the LEDs do not light properly, go to 

2

.

RELEASE FX lever

RELEASE FX 
indicator LED

Note:

Recalibration is not required when only the upper left 
screw is removed.
The upper left screw must be removed when the 
insulating sheet (DEC339

8

) is to be removed.

Therefore, this screw may require frequent removal, 
as the insulating sheet must be removed each time 
the panel board is to be diagnosed.

Содержание Remix station RMX-1000






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды