Pioneer PRS-D800, Руководство пользователя

Страница: 10 / 40

5
4
3
1
2
1
Front speaker output (Left)
2 Rear speaker output (Left)
3
RCA input jack A
4
RCA cable (sold separately)
5
From car stereo (RCA output)
One-channel input (Mono)
When connecting a speaker (Bridge)
!
Slide INPUT (input) switch to 1CH position.
4
3
1
2
1
Speaker output
2
RCA input jack A
3
RCA cable (sold separately)
4
From car stereo (RCA output)
Connecting the power
terminal
The use of a special red battery and ground
wire RD-223 (sold separately), is recom-
mended. Connect the battery wire directly to
the car battery positive terminal
+
and the
ground wire to the car body.
WARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (
+
) battery
terminal.
1
Positive (
+
) terminal
2
Engine compartment
3
Vehicle interior
4
Fuse (30 A) × 2
5
Insert the O-ring rubber grommet into the
vehicle body.
6
Drill a 14 mm (1/2 in.) hole into the vehicle
body.
2 Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
En
10
Section
02
Connecting the units