Pioneer PDP-42MXE20, Техническое руководство

Страница: 3 / 262

3
Table of Contents
CAUTION
• To prevent injury and material damage, thoroughly read
this manual and all labels found on the equipment before
attempting to mount, install, move, or adjust the product.
• Do not install the unit outside or in the open air. Doing
so will lead to water seepage into the system, resulting
in fire or electric shock.
• Be especially careful when working around parts of the
system that have sharp edges.
• When performing installation work from a height, take
suitable precautions to guard against falling. Set up a
barrier around the work site to prevent accidentally
dropped objects that can injure people standing or
walking below. Tampering with the unit may result in
fire or electrical shock.
• Keep all foreign objects out of the unit. Tampering with
the unit may result in fire or electrical shock.
• Observe the following operating environmental
limitations:
Temperature: 0 °C to 40 °C
Humidity: 20 % to 80 %
• Install the unit only in properly ventilated areas.
5.2 Normal Operation Mode ......................................... 162
5.2.1 About normal operation mode ........................ 162
5.3 Menu Mode .............................................................. 164
5.3.1 About menu mode .......................................... 164
5.3.2 Concerning the display of the OSD of
each item ........................................................ 164
5.3.3 Example of a Menu Mode Operation .............. 165
5.3.4 Adjustment and setting in the Menu Mode .... 166
1) Color Temperature Setting ....................... 166
2) Power Management and Auto Power
OFF Setting .............................................. 167
3) DNR (digital noise reduction) Setting ........ 168
4) MPEG NR Setting ..................................... 169
5) CTI Setting ................................................ 170
6) PURECINEMA Setting .............................. 171
7) Color Decoding Setting ............................. 173
8) Color System Setting ................................ 174
9) Signal Format Setting ............................... 175
10) DVI Setting ............................................... 177
11) Menu Language Display Setting ............... 178
12) Energy Saving Setting .............................. 179
13) Timer Setting ............................................ 181
14) Program/Repeat Timer Setting ................. 181
15) Orbiter Setting .......................................... 182
16) Soft Focus Setting .................................... 183
17) Auto Set Up Mode Setting ....................... 184
18) Screen Position, Clock Frequency and
Clock Phase Adjustment .......................... 185
19) Auto Function Mode Setting .................... 187
20) PIP DETECT Setting ................................. 188
21) SPLIT FREEZE Setting .............................. 189
5.4 Integrator Mode ....................................................... 190
5.4.1 About the Integrator Mode ............................. 190
5.4.2 Example of Integrator Mode Operation .......... 191
5.4.3 Adjustment and Setting in the Integrator
Mode ............................................................... 192
1)
PICTURE Adjustment ............................... 192
2) WHITE BALANCE Adjustment ................. 193
3) COLOR DETAIL setting ............................ 194
4) GAMMA Setting ....................................... 195
5) SCREEN (Screen Position) Adjustment .... 196
6) Brightness Enhancement (BRT. ENHANCE)
Setting at the Center of the Screen .......... 197
7) SUB VOLUME Setting .............................. 198
8) Program Timer Setting ............................. 199
9) SCREEN MASK Setting ............................ 201
10) SIDE MASK Setting .................................. 202
11) VIDEO WALL Setting ............................... 204
12) BAUD RATE Setting ................................. 208
13) Assigning an ID ......................................... 209
14) Cooling Fan Control Setting ...................... 211
15) OSD Display Setting ................................. 212
16) FRONT INDICATOR Setting ..................... 214
17) COLOR MODE Setting ............................. 215
18) PRO USE Setting ...................................... 216
19) FRC Setting .............................................. 218
20) POWER ON MODE Setting ...................... 219
21) SEAMLESS SW Setting ............................ 221
22) MIRROR MODE Setting ........................... 222
23) MULTISCREEN Setting ............................ 224
24) REPEAT TIMER Setting ............................ 227
25) FUNCTIONAL LOCK ................................. 229
26) Center Position Display ............................ 230
5.4.4 PICTURE, White Balance and SCREEN Position
Adjustment Values Memory Area Tables ....... 231
5.5 RS-232C Adjustment ................................................ 236
5.5.1 About the RS-232C Adjustment ...................... 236
5.5.2 Interface .......................................................... 237
5.5.3 Combination Connection ................................. 238
5.5.4 ID Assignment ................................................ 239
5.5.5 List of RS-232C Commands ............................ 241
5.5.6 QUEST Commands ......................................... 249
5.6 Screen Burning ........................................................ 257
5.7 Precautions on Connecting Camera Images ......... 259
5.8 Concerning frame delay (lip sync) .......................... 259
PRECAUTION
6.1 Precautions .......................................................... 260
MAINTENANCE .................................................................. 261
* The difference of PDP-50MXE20 and PDP-
50MXE20-S is front-bezel color.
PDP-50MXE20-S is the model of which color of
front-bezel is silver. Please refer the specification
of PDP-50MXE20 about the spec. of this unit.
* The difference of PDP-S53-LR and PDP-S54-LR
is the baffle color.
The PDP-S54-LR's baffle is silver while the PDP-
S53-LR is black. Please refer to the PDP-S53-LR
the specifications for more information.
* The difference of PDK-TS01 and PDK-TS07 is the
base color.
The PDK-TS01's base is gray while the PDK-TS07
is black. Please refer to the PDK-TS07 the
specifications for more information.