PDA-H05 Cleaning Kit (AZE1141)
If the DVI cable, MDR cable, AC adapter and optical cable are connected, but the transmitter does not operate
correctly, the connectors may be dirty.
Please clean the connectors using this kit.
Cleaning Method
Cleaning the sides of the optical cable end (ferrule)
Cleaner for the sides of the ferrule end.
Cover the ferrule with the
cleaner and turn five times.
Ferrule end cleaning sheet
1
Place the ferrule end perpendicularly
on the cleaning sheet and rub a few
times (use the same pressure as you
would when writing with a pen).
Cleaning the optical cable end
2
Change the cable angle 90° and
clean the ferrule again, using a
different part of the cleaning sheet.
Cleaning the repeater box
Cleaner
part
A cleaner should be used only once. Use one cleaner to clean one location.
A cleaner should be used only once. Use one cleaner to clean one location.
Cleaner
part
Repeater box cleaner
1
Insert the cleaner into the tube
within the connector.
2
Insert the cleaner into the back of the connector.
3
After inserting the cleaner into the hole,
turn the cleaner a few times.
