3 When you find the desired track press
b
to turn scan play off.
SCAN :OFF
appears in the display. The track
will continue to play.
#
If the display has automatically returned to
the playback display, select
SCAN
again by press-
ing
FUNCTION
.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select PAUSE.
Press
FUNCTION
until
PAUSE
appears in the
display.
2 Press
a
to turn pause on.
PAUSE:ON
appears in the display. Play of the
current track pauses.
3 Press
b
to turn pause off.
PAUSE:OFF
appears in the display. Play will re-
sume at the same point that you turned pause
on.
Note
You can also turn pause on or off by pressing
PAUSE
.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select COMP.
Press
FUNCTION
until
COMP
appears in the
display.
2 Press
a
or
b
to select your favorite set-
ting.
Press
a
or
b
repeatedly to switch between the
following settings:
COMP OFF
COMP 1
COMP 2
COMP OFF
BMX 1
BMX 2
Selecting the search method
You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Press FUNCTION to select FF/REV.
Press
FUNCTION
until
FF/REV
appears in the
display.
#
If the search method
ROUGH
has been pre-
viously selected,
ROUGH
will be displayed.
2 Press
c
or
d
to select the search meth-
od.
Press
c
or
d
until the desired search method
appears in the display.
!
FF/REV
Fast forward and reverse
!
ROUGH
Searching every 10 tracks
Built-in CD Player
En
18
Section
05