MVH-290BT/XEUC
9
5
6
7
8
5
6
7
8
C
D
F
A
B
E
5.2 ERROR CODE LIST
Common
AMP ERROR
This unit fails to operate or the
speaker connection is incorrect.
The protective circuit is activated.
– Check the speaker connection.
– Check the power IC and its
peripheral circuit.
NO XXXX(NO TITLE, for example)
There is no embedded text
information.
– Switch the display or play another
track/file.
USB device
FORMAT READ
Sometimes there is a delay
between the start of playback and
when you start to hear any sound.
– Wait until the message
disappears and you hear sound.
NO AUDIO
There are no songs.
– Transfer the audio files to the USB
device and connect.
The connected USB device has
security enabled.
– Follow the USB device
instructions to disable the
security.
SKIPPED
The connected USB device contains
DRM protected files.
– The protected files are skipped.
PROTECT
All the files on the connected USB
device are embedded with DRM.
– Replace the USB device.
N/A USB
The connected USB device is not
supported by this unit.
– Disconnect your device and
replace it with a compatible USB
device.
HUB ERROR
The USB device connected via a
USB hub is not supported by this
unit.
– Connect the USB device directly
to this unit using a USB cable.
CHECK USB
The USB connector or USB cable
has short-circuited.
– Check that the USB connector or
USB cable is not caught in
something or damaged.
The connected USB device
consumes more than maximum
allowable current.
– Disconnect the USB device and
do not use it. Turn the ignition
switch OFF and back to ACC or
ON. Connect only compliant USB
devices.
ERROR-19
Communication failed.
– Perform one of the following
operations, then return to the
USB source.
•
Turn the ignition switch OFF and
back to ON.
•
Disconnect the USB device.
•
Change to a different source.
ERROR-23
USB device was not formatted
properly.
– Format the USB device with
FAT12, FAT16 or FAT32.
STOP
There are no songs in the current
list.
– Select a list that contains songs.
Bluetooth device
ERROR-10
The power failed for the Bluetooth
module of the unit.
– Turn the ignition switch OFF and
back to ACC or ON.