Pioneer MVH-150UI, Руководство пользователя

Страница: 4 / 156

6 Press M.C. to select.
Notes
!
You can set up the menu options from the
system menu. For details about the settings,
refer to
System menu on page 11.
!
You can cancel set up menu by pressing
SRC / OFF .
Basic operations
Important
!
Handle gently when removing or attaching
the front panel.
!
Avoid subjecting the front panel to excessive
shock.
!
Keep the front panel out of direct sunlight
and high temperatures.
!
To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Removing the front panel to protect your unit from
theft
1
Press the detach button to release the front
panel.
2
Push the front panel upward (
M
) and then pull
it toward (
N
) you.
3
Always keep the detached front panel in a pro-
tection device such as a protection case.
Re-attaching the front panel
1
Slide the front panel to the left.
Make sure to insert the tabs on the left side of
the head unit into the slots on the front panel.
2
Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the
head unit successfully, make sure that you are
placing the front panel onto the head unit cor-
rectly. Forcing the front panel into place may
result in damage to the front panel or head
unit.
Turning the unit on
1
Press SRC / OFF to turn the unit on.
Turning the unit off
1
Press and hold SRC / OFF until the unit turns
off.
Selecting a source
1
Press SRC / OFF to cycle between:
TUNER
(tuner)
—
USB
(USB)/
iPod
(iPod)
—
AUX (AUX)
—
BT AUDIO (Bluetooth audio)
!
BT AUDIO is not available for MVH-150UI.
!
Only for MVH-150UI
When there is an iPod connected and a source
other than
iPod
is selected, you can switch to
iPod by pressing iPod .
Adjusting the volume
1
Turn
M.C.
to adjust the volume.
CAUTION
For safety reasons, park your vehicle when re-
moving the front panel.
Note
When this unit
’
s blue/white lead is connected to
the vehicle
’
s auto-antenna relay control termi-
nal, the vehicle
’
s antenna extends when this
unit
’
s source is turned on. To retract the anten-
na, turn the source off.
Frequently used menu
operations
Returning to the previous display
Returning to the previous list (the folder one level
higher)
1
Press / DIMMER .
Returning to the ordinary display
Canceling the main menu
1
Press
BAND
/ .
Returning to the ordinary display from the list
1
Press BAND / .
Tuner
Basic operations
Selecting a band
1
Press BAND / until the desired band ( FM1 ,
FM2
,
FM3
for FM or
MW/LW
) is displayed.
Switching preset stations
1
Press c or d .
!
Select PCH (preset channel) under SEEK to
use this function. For details about the set-
tings, refer to
SEEK (left/right key setting) on
the next page.
Manual tuning (step by step)
1
Press
c
or
d
.
!
Select
MAN
(manual tuning) under
SEEK
to
use this function. For details about the set-
tings, refer to
SEEK (left/right key setting) on
the next page.
Seeking
1
Press and hold
c
or
d
, and then release.
You can cancel seek tuning by briefly pressing
c or d .
While pressing and holding
c
or
d
, you can
skip stations. Seek tuning starts as soon as
you release
c
or
d
.
Note
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to
AF (al-
ternative frequencies search) on the next page).
Storing and recalling stations
for each band
Using preset tuning buttons
1 When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1/
to 6/ ) and hold until
the preset number stops flashing.
Operating this unit
4
Section
Operating this unit
En
02