61
M-AX10
Continuous power output
(driven simultaneously at 20Hz to 20kHz) **
(European mode only)
Bridge mode
T.H.D. 0.15% 6
Ω ....................................................................
220W
×
2
T.H.D. 0.09% 8
Ω ....................................................................
190W
×
2
Dual, Seaprate mode
T.H.D. 0.15% 3
Ω ....................................................................
100W
×
4
T.H.D. 0.09% 4
Ω ......................................................................
90W
×
4
T.H.D. 0.08% 8
Ω ......................................................................
60W
×
4
DIN Continuous power output
(driven simultaneously at 1kHz)
(European mode only)
Bridge mode
T.H.D. 1% 6
Ω ..........................................................................
230W
×
2
T.H.D. 1% 8
Ω ..........................................................................
200W
×
2
Dual, Seaprate mode
T.H.D. 1% 3
Ω ..........................................................................
110W
×
4
T.H.D. 1% 4
Ω ..........................................................................
105W
×
4
T.H.D. 1% 8
Ω ............................................................................
65W
×
4
Total harmonic distortion **
Bridge mode
20 Hz to 20 kHz,100W, 8
Ω ..........................................................
0.08%
Dual, Seaprate mode
20 Hz to 20 kHz,30W, 8
Ω .............................................................
0.06%
Input sensitivity/Impedance
INPUT 1,2 .......................................................................... 1V/47k
Ω
Frequency Response
INPUT 1,2 ............................................ 5Hz to 150 kHz +0dB, -3dB
Damping factor (1kHz/20Hz to 20kHz)
............................................................................................ 400/300
SPECIFICATIONS
Amplifier Section
(U.S model only)
When set to Bridge mode:
Continuous average power output is 200 Watts* per
channel, min.,at 6 ohms from 20 Herz to 20,000 Herz
with no more than 0.2%** total harmonic distortion.
When set to Dual mode ,Seaprate mode:
Continuous average power output is 90 Watts* per
channel, min.,at 3 ohms from 20 Herz to 20,000 Herz
with no more than 0.2%** total harmonic distortion.
Signal-to Noise ratio (IHF short circuit, A network
ATT THROUGH ON)
INPUT 1,2 .............................................................................. 125dB
Channel separation(20Hz to 20 kHz)
Bridge mode ........................................................................... 104dB
Dual, Seaprate mode ............................................................. 115dB
Power supply/Mischellaneouse
Power requirements
U.S.model ................................................................. AC120V 60Hz
European model ................................................... AC230V 50/60Hz
Power comsumption
U.S.model ............................................................................... 370W
European model ...................................................................... 400W
Dimensions ................................... 440 (W)
×
420 (D)
×
178 (H) mm
17
5
/
16
(W)
×
16
1
/
2
(D)
×
7 (H)in.)
Weight (without package) .............................. 25.8 kg (56 lbs 14oz)
Accessories
Operation instructions .................................................................... 1
Warranty card ................................................................................ 1
NOTE
Specifications and design subject to possible modifications
without notice ,due to improvement.
* Mesured pursuant to the Federal Trade Commissions' Trade
Regulation rule on Power Claims for Amplifier.
** Mesured by Audio Spectrum Analyzer.